Roller Shutter Door Making Machine - Steel Doors

Shutter and door-frame profiles are judged by straightness and by the accuracy of the lock and hinge areas. This Roller Shutter Door forms the target sections from coil, punches where required, and cuts each piece to a programmed length with a burr-free edge ready for welding or bolting.

Overview

The Roller Shutter Door Making Machine is a fully automatic roll forming line designed to produce roller shutter doors with automatic forming. With 0.3-0.8mm material, feeding width 1220mm, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. PLC control ensures automatic operation. It is CE BV STV ISO certified with a 2 years warranty. Every unit ships with a machinery test report and video outgoing-inspection.

Frame and shutter production pairs well with a small bending and welding station: you convert coil all the way to a ready-to-install door frame, which raises your margin well above selling raw profile lengths.

Technical Specifications

Product name	ZTRFM Roller Shutter Door Making Machine Door Roller Shutter Machines
Usage	Building
Raw material	PPGI PPGL GI GL
Cutting blade material	Cr12 Mould Steel
Roller material	45#steel Chrome Plated
Shaft material	High Grade No.45 Forged
Control system	PLC(imported Brand)
Certification	CE BV STV ISO
Application	Roof Sheet Production
Main frame	350H Steel
Type	Tile Forming Machine
Tile Type	Colored Steel
Use	WALL
Voltage	380V,440V
Warranty	2 years
Key Selling Points	Easy to Operate
Rolling thinckness	0.3-0.8mm
Feeding width	1220mm
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Core Components	Pressure vessel,Motor,Bearing,Gear,Pump,Engine
Place of Origin	CN;HEB
Brand Name	ZTRFM
product title	ZTRFM Roller Shutter Door Making Machine Door Roller Shutter Machines

Key Specifications of the Roller Shutter Door

The line is set up for coil in the 0.3-0.8mm thickness range, with roller clearances and cutting capacity matched to that material program. Feeding width is 1220mm, which determines the widest profile this machine can produce and the coil sizes you can buy economically. Electrical supply is 380V, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC(imported Brand), so operators switch between jobs from the panel without mechanical re-setup. Forming rollers are 45#steel Chrome Plated, giving predictable profile accuracy and long intervals between re-grinds. The forming shafts are High Grade No.45 Forged, selected for stiffness so the roller stack stays aligned under load.

Key Features

Processes PPGI PPGL GI GL raw material
Handles 0.3-0.8mm material thickness
Feeding width up to 1220mm
PLC(imported Brand) for automatic operation
Machinery test report and video outgoing-inspection provided
CE BV STV ISO certified

We supply the machine with roller sets for your target sizes and a full parameter list, and keep the drawings on file so re-ordering extra rollers later is a simple email.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI PPGL GI GL coil.

What is the warranty period?

A 2 years warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.3-0.8mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

What feeding width does this machine accept?

The feeding width is 1220mm. This decides the maximum profile width and also the master coil widths you can purchase, which affects your material cost per meter.

Does it include punching?

Punching is available as an in-line option, synchronized with the PLC for hole positions on frames and curtain ends. This avoids a separate drilling step and keeps hole spacing consistent.

What is the lead time?

Lead time depends on the configuration; standard lines typically ship in 20-35 days after drawing confirmation. Roller sets are manufactured together with the main machine, so confirming your profile drawing early keeps the schedule short.

How do you handle a custom profile?

Send us the profile drawing or a sample section. Our engineers check forming feasibility and confirm the roller layout and station count before production, and we keep the drawings on file for future roller orders.

What profiles can this machine form?

Typical outputs include rolling shutter curtain profiles, door frame sections, side guide rails and related accessories. The roller set is built to your profile drawing, so tell us the section you need and we confirm the configuration.

Related Machines

Explore more machines in this category:

View all Door & Ceiling Profile Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.