PLC Shutter Door Roll Forming Machine - Door Frame Line

Shutter and door-frame profiles are judged by straightness and by the accuracy of the lock and hinge areas. This PLC Shutter Door forms the target sections from coil, punches where required, and cuts each piece to a programmed length with a burr-free edge ready for welding or bolting.

Overview

The PLC Shutter Door Roll Forming Machine is a fully automatic roll forming line designed to produce shutter doors and steel door frames with PLC control. With 7.5kw+5.5kw drive power, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. PLC control ensures automatic operation. It is ISO CE certified with a 1.5 years warranty. Every unit ships with a machinery test report and video outgoing-inspection.

Frame and shutter production pairs well with a small bending and welding station: you convert coil all the way to a ready-to-install door frame, which raises your margin well above selling raw profile lengths.

Technical Specifications

Product name	Shutter Door Roll Forming Making Steel Door Frame Making Machine
Keywords	Roll Forming Making Machine
Usage	Construction Building Material
Roller material	Cr12
Shaft material	45# High Grade Steel
Control system	PLC(imported Brand)
Raw material	PPGI PPGL GI GL
Cutting blade material	Cr 12 High Grade Steel
Application	Building Construction
Certification	ISO CE
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Core Components	PLC,Bearing,Motor,Gear,Pump
Warranty	1.5 years
Key Selling Points	Automatic
Place of Origin	CN;HEB
Work Pressure	16 mpa
Brand Name	ZTRFM
Voltage	380v 50hz or customized,380V
Power	7.5kw+5.5kw
*Dimension(LWH)*	121.52.0m
product title	Automatic PLC-controlled Shutter Door Roll Forming Machine for Steel Door Frame Production with Gear & Bearing

Key Specifications of the PLC Shutter Door

The main drive is rated at 7.5kw+5.5kw, sized for continuous operation at full line speed without overheating on long shifts. Electrical supply is 380v 50hz or customized, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC(imported Brand), so operators switch between jobs from the panel without mechanical re-setup. Forming rollers are Cr12, giving predictable profile accuracy and long intervals between re-grinds. The forming shafts are 45# High Grade Steel, selected for stiffness so the roller stack stays aligned under load. The machine is built to run PPGI PPGL GI GL coil, and the tooling path is set up for these coated or galvanized materials without surface marking.

Key Features

Processes PPGI PPGL GI GL raw material
PLC(imported Brand) for automatic operation
Machinery test report and video outgoing-inspection provided
ISO CE certified

We supply the machine with roller sets for your target sizes and a full parameter list, and keep the drawings on file so re-ordering extra rollers later is a simple email.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI PPGL GI GL coil.

What is the warranty period?

A 1.5 years warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What is the installed power of this machine?

The line is rated at 7.5kw+5.5kw. Power consumption in practice is lower than the rated figure for most running profiles, since the drive only loads under material.

What voltage does the machine require?

The standard configuration runs on 380v 50hz or customized. We can adapt the electrical cabinet to your local supply, so confirm your site voltage when ordering.

What coil gauge does it handle?

Shutter curtain profiles commonly run from 0.3 mm to 0.6 mm galvanized or pre-painted steel; door frame sections often run 1.0-2.0 mm. Confirm your material and we will size the machine accordingly.

Can I produce door frames and shutters on one line?

Yes, the same machine can be set up for more than one profile family with changeable rollers. If your production mix includes both, we can recommend the configuration that balances changeover time and output.

How do you handle a custom profile?

Send us the profile drawing or a sample section. Our engineers check forming feasibility and confirm the roller layout and station count before production, and we keep the drawings on file for future roller orders.

Does it include punching?

Punching is available as an in-line option, synchronized with the PLC for hole positions on frames and curtain ends. This avoids a separate drilling step and keeps hole spacing consistent.

Related Machines

Explore more machines in this category:

View all Door & Ceiling Profile Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.