Wall Angle Roll Forming Machine - PLC Control

Drywall and ceiling profiles are high-volume, low-margin products, so the machine that makes them must run fast and stop rarely. This Wall Angle forms the target sections from galvanized coil at high line speed, with a PLC that keeps lengths consistent for palletizing and direct dispatch.

Overview

The Wall Angle Roll Forming Machine is a fully automatic roll forming line designed to produce wall angle profiles with PLC controlled line. With 3+3 KW drive power, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. PLC control ensures automatic operation. It is ISO CE certified with a 1 Year warranty. Every unit ships with a machinery test report and video outgoing-inspection.

These machines supply profiles to drywall contractors, ceiling installers and partition-system manufacturers. Target profiles are consumed in office fit-outs, hotels, hospitals and residential projects wherever lightweight steel framing is preferred over timber. Demand is steady, so a drywall line usually reaches high utilization within the first months of operation.

Technical Specifications

Product name	Purlin Roll Forming Machine
Usage	Construction Building Material
Roller material	Cr12
Shaft material	45# High Grade Steel
Control system	PLC(imported Brand)
Raw material	PPGI PPGL GI GL
Certification	ISO CE
Cutting blade material	Cr 12 High Grade Steel
Working material	Cold Roll Steel(CRC)
Application	Building Construction
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Core Components	PLC,Engine,Bearing,Motor,Gear,Pump
Warranty	1 Year
Key Selling Points	High Safety Level
Place of Origin	CN;HEB
Brand Name	ZTRFM
Voltage	380V/50HZ 3Phase
Power	3+3 KW
*Dimension(LWH)*	29006001400mm
product title	ZTRFM Steel Profile Machine Wall Angle Roll Forming Machine with PLC Control Engine-Driven Motor High Safety Gear Bearing System

Key Specifications of the Wall Angle

The main drive is rated at 3+3 KW, sized for continuous operation at full line speed without overheating on long shifts. Electrical supply is 380V/50HZ 3Phase, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC(imported Brand), so operators switch between jobs from the panel without mechanical re-setup. Forming rollers are Cr12, giving predictable profile accuracy and long intervals between re-grinds. The forming shafts are 45# High Grade Steel, selected for stiffness so the roller stack stays aligned under load. The machine is built to run PPGI PPGL GI GL coil, and the tooling path is set up for these coated or galvanized materials without surface marking.

Key Features

Processes PPGI PPGL GI GL raw material
PLC(imported Brand) for automatic operation
Machinery test report and video outgoing-inspection provided
ISO CE certified

For drywall lines, uptime is everything. This Wall Angle uses a drive sized for continuous duty, a quick-release roller arrangement for profile changes, and a cutting unit that keeps pace with the fastest packing crew. Most operators reach full rated speed within the first week.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI PPGL GI GL coil.

What is the warranty period?

A 1 Year warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What is the installed power of this machine?

The line is rated at 3+3 KW. Power consumption in practice is lower than the rated figure for most running profiles, since the drive only loads under material.

What voltage does the machine require?

The standard configuration runs on 380V/50HZ 3Phase. We can adapt the electrical cabinet to your local supply, so confirm your site voltage when ordering.

Which profiles can it produce?

The machine is delivered with rollers for your target profiles, commonly C stud, U track, furring channel, hat channel, wall angle and ceiling T-bar. Additional roller sets can be supplied later for new sizes.

What after-sales support do you offer?

We provide installation guidance by video, a commissioning checklist, a spare parts list and remote assistance during setup. Roller and blade spares are available for re-order.

What coil material is suitable?

Galvanized and pre-painted steel coil from 0.3 mm to 1.0 mm is typical for drywall and ceiling profiles. If you plan a different gauge range, tell us so we can adjust the forming stations and drive.

Does it cut profiles to length automatically?

Yes, lengths are set in the PLC and the machine cuts automatically, with counting support for standard packing. Length presets can be stored for the different products you run.

Related Machines

Explore more machines in this category:

View all Door & Ceiling Profile Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.