Slotted Wall Angle Beads Machine - V & L Profiles

Drywall and ceiling profiles are high-volume, low-margin products, so the machine that makes them must run fast and stop rarely. This Slotted Wall Angle Beads forms the target sections from galvanized coil at high line speed, with a PLC that keeps lengths consistent for palletizing and direct dispatch.

Overview

The Slotted Wall Angle Beads Machine is a fully automatic roll forming line designed to produce slotted V and L profile wall angle beads for drywall and plastering. With 7.5kw drive power, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts with PLC control. It is ISO CE certified with a 2 years warranty. Every unit ships with a machinery test report and video outgoing-inspection.

These machines supply profiles to drywall contractors, ceiling installers and partition-system manufacturers. Target profiles are consumed in office fit-outs, hotels, hospitals and residential projects wherever lightweight steel framing is preferred over timber. Demand is steady, so a drywall line usually reaches high utilization within the first months of operation.

Technical Specifications

Product name	L corner track machine
Control System	PLC with touch screen
Way Of Drive	Gear
Roll material	45# high grade steel
Shaft material	45# high grade steel
Frame material	300 H-high grade steel
Cutting blade material	Cr 12 high grade steel
Cutting type	Hydraulic cutting
Feature	High speed, low energy consumption
Certification	ISO CE
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Core Components	PLC,Engine,Bearing,Motor,Gear,Pump
Warranty	2 years
Key Selling Points	Easy to Operate
Work Pressure	380V 50Hz 3Phase(As your requirement)
Place of Origin	Hebei,China
Brand Name	ZTRFM
Voltage	380V/50HZ 3Phase
Power	7.5kw
*Dimension(LWH)*	51.51.5m

Key Specifications of the Slotted Wall Angle Beads

The main drive is rated at 7.5kw, sized for continuous operation at full line speed without overheating on long shifts. Electrical supply is 380V/50HZ 3Phase, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC with touch screen, so operators switch between jobs from the panel without mechanical re-setup. The forming shafts are 45# high grade steel, selected for stiffness so the roller stack stays aligned under load. The machine is built to run 45# high grade steel coil, and the tooling path is set up for these coated or galvanized materials without surface marking. Cutting is done by Hydraulic cutting, synchronized with line speed so sheet ends stay square and burr-free.

Key Features

Processes 45# high grade steel raw material
PLC with touch screen for automatic operation
Machinery test report and video outgoing-inspection provided
ISO CE certified

For drywall lines, uptime is everything. This Slotted Wall Angle Beads uses a drive sized for continuous duty, a quick-release roller arrangement for profile changes, and a cutting unit that keeps pace with the fastest packing crew. Most operators reach full rated speed within the first week.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes 45# high grade steel coil.

What is the warranty period?

A 2 years warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What is the installed power of this machine?

The line is rated at 7.5kw. Power consumption in practice is lower than the rated figure for most running profiles, since the drive only loads under material.

What voltage does the machine require?

The standard configuration runs on 380V/50HZ 3Phase. We can adapt the electrical cabinet to your local supply, so confirm your site voltage when ordering.

What is the production speed?

High-speed drywall and ceiling lines in this class run approximately 40-60 m/min for standard stud, track and furring profiles. The actual rate depends on the profile size and cutting cycle.

Can one machine replace manual bending?

Yes. Replacing manual profile bending with a roll forming line removes the most labour-intensive step and gives consistent dimensions. Most customers recover the investment through labour saving within the first year at two-shift operation.

What coil material is suitable?

Galvanized and pre-painted steel coil from 0.3 mm to 1.0 mm is typical for drywall and ceiling profiles. If you plan a different gauge range, tell us so we can adjust the forming stations and drive.

Does it cut profiles to length automatically?

Yes, lengths are set in the PLC and the machine cuts automatically, with counting support for standard packing. Length presets can be stored for the different products you run.

Related Machines

Explore more machines in this category:

View all Door & Ceiling Profile Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.