Automatic Roller Shutter Door Machine - 11kW

Shutter and door-frame profiles are judged by straightness and by the accuracy of the lock and hinge areas. This Automatic Roller Shutter Door forms the target sections from coil, punches where required, and cuts each piece to a programmed length with a burr-free edge ready for welding or bolting.

Overview

The Automatic Roller Shutter Door Machine forms roller shutter door slats and profiles from PPGI, PPGL, GI and GL coil. With a 350H steel main frame, PLC control and forming speeds up to 30 m/min, it is built for continuous shutter door production.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, the line uses high grade 45# forged shafts, chrome plated 45# steel rollers and Cr12 mould steel cutting blades, processing 0.3-1mm material. CE, BV, STV and ISO certified with a 1-year warranty.

Frame and shutter production pairs well with a small bending and welding station: you convert coil all the way to a ready-to-install door frame, which raises your margin well above selling raw profile lengths.

Technical Specifications

Product name	Roof Sheet Forming Machine
Usage	Building
Raw material	PPGI PPGL GI GL
Cutting blade material	Cr12 Mould Steel
Roller material	45#steel Chrome Plated
Shaft material	High Grade No.45 Forged
Certification	CE BV STV ISO
Control system	PLC(imported Brand)
Main frame	350H Steel
Application	Roof Sheet Production
Type	Tile Forming Machine
Tile Type	Steel
Use	Door
Warranty	1 Year
Key Selling Points	High Productivity
Rolling thinckness	0.3-1mm
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Core Components	Motor,PLC
Place of Origin	CN;HEB
Brand Name	ZTRFM
Voltage	380V/50HZ/3P
Weight	3000 kg
Feeding width	Other
size	20X20X20 cm

Key Specifications of the Automatic Roller Shutter Door

The line is set up for coil in the 0.3-1mm thickness range, with roller clearances and cutting capacity matched to that material program. Electrical supply is 380V/50HZ/3P, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC(imported Brand), so operators switch between jobs from the panel without mechanical re-setup. Forming rollers are 45#steel Chrome Plated, giving predictable profile accuracy and long intervals between re-grinds. The forming shafts are High Grade No.45 Forged, selected for stiffness so the roller stack stays aligned under load. The machine is built to run PPGI PPGL GI GL coil, and the tooling path is set up for these coated or galvanized materials without surface marking.

Key Features

Forms roller shutter door profiles from a single line
350H steel main frame with high grade 45# forged shafts
Chrome plated 45# steel rollers, Cr12 mould steel cutting blades
PLC control (imported brand), forming speed up to 30 m/min
Processes 0.3-1mm PPGI, PPGL, GI and GL coil
CE, BV, STV and ISO certified; 1-year warranty; video inspection provided

We supply the machine with roller sets for your target sizes and a full parameter list, and keep the drawings on file so re-ordering extra rollers later is a simple email.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material thickness does it handle?

It processes 0.3-1mm PPGI, PPGL, GI and GL coil.

What is the warranty?

A 1-year warranty applies.

Can the roller sets be customized?

Yes, roller sets can be manufactured to your exact shutter profile drawings.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.3-1mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

What voltage does the machine require?

The standard configuration runs on 380V/50HZ/3P. We can adapt the electrical cabinet to your local supply, so confirm your site voltage when ordering.

What coil gauge does it handle?

Shutter curtain profiles commonly run from 0.3 mm to 0.6 mm galvanized or pre-painted steel; door frame sections often run 1.0-2.0 mm. Confirm your material and we will size the machine accordingly.

Can I produce door frames and shutters on one line?

Yes, the same machine can be set up for more than one profile family with changeable rollers. If your production mix includes both, we can recommend the configuration that balances changeover time and output.

Does it include punching?

Punching is available as an in-line option, synchronized with the PLC for hole positions on frames and curtain ends. This avoids a separate drilling step and keeps hole spacing consistent.

What is the lead time?

Lead time depends on the configuration; standard lines typically ship in 20-35 days after drawing confirmation. Roller sets are manufactured together with the main machine, so confirming your profile drawing early keeps the schedule short.

Related Machines

Explore more machines in this category:

View all Door & Ceiling Profile Machines | All products

Get a Quote

Interested in this machine? Contact Zhongtuo (ZTRFM) for pricing, delivery time and configuration options. As a CE and ISO certified manufacturer in Botou, Hebei, China since 2019, we serve machinery buyers in over 80 countries with OEM/ODM customization, machinery test reports and video outgoing-inspection on every machine.