Wall L Angle & Gypsum Ceiling Machine - 45 m/min

Stud, track, furring and ceiling profiles look simple, but their tolerances decide how fast fitters work on site. This Wall L Angle & Gypsum Ceiling is built with precision stations that hold the section profile and leg height steady, so your customers do not waste time forcing panels into mis-shaped tracks.

Overview

The Wall L Angle & Gypsum Ceiling Machine is a fully automatic roll forming line designed to produce wall L angle and gypsum ceiling profiles. With 0.3-1.0mm material, feeding width 300mm, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. It is CE ISO certified with a 2 years warranty. Every unit ships with a machinery test report and video outgoing-inspection.

The same line can run several profile sizes with changeable roller sets, which is a practical way to cover stud, track and furring demand with one machine investment and a small roller inventory.

Technical Specifications

Advantage	Easy installation and operation
Local service	Provide Engineers door-to-door service
Certification	CE ISO
Raw material	PPGI,PPGL
Material of shafts	45# steel with tempering
Material of blades	Cr12 quenched
Product name	Ppgi Wall L Angle Gypsum Ceiling Steel Forming Machine
Usage	Building
Shaft material	High Grade No.45 Forged
Application	Roof Sheet Production
Tile Type	Steel
Use	ROOF
Warranty	2 years
Key Selling Points	High Safety Level
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Place of Origin	CN;HEB
Brand Name	ZTRFM
Voltage	380V,50HZ,3PH
*Dimension(LWH)*	360013001500mm
Rolling thinckness	0.3-1.0mm
Feeding width	300mm
Core Components	Pressure vessel,Motor,Bearing,Gear,Pump,Gearbox,Engine,PLC,Other
product title	For 45m/Min High Speed PPGI Wall L Angle Gypsum Ceiling Steel Forming Machine Keel Machine Roll Forming Gear CE ISO Certified

Key Specifications of the Wall L Angle & Gypsum Ceiling

Rated forming speed is 45 m/min, which sets the practical daily output of the line and makes production planning straightforward for the sizes you run. The line is set up for coil in the 0.3-1.0mm thickness range, with roller clearances and cutting capacity matched to that material program. Feeding width is 300mm, which determines the widest profile this machine can produce and the coil sizes you can buy economically. Electrical supply is 380V, and the control cabinet can be adapted to your local voltage when ordering. The forming shafts are 45# steel with tempering, selected for stiffness so the roller stack stays aligned under load. The machine is built to run PPGI coil, and the tooling path is set up for these coated or galvanized materials without surface marking.

Key Features

Processes PPGI,PPGL raw material
Handles 0.3-1.0mm material thickness
Feeding width up to 300mm
Machinery test report and video outgoing-inspection provided
CE ISO certified

We test each line with the gauge of coil you specify and provide a sample batch of finished profiles for your quality file before the machine ships.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI,PPGL coil.

What is the warranty period?

A 2 years warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What is the forming speed of this machine?

The rated forming speed is 45 m/min. Actual output depends on the profile, material gauge and cutting cycle; we confirm the tested speed for your configuration in the quotation.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.3-1.0mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

What coil material is suitable?

Galvanized and pre-painted steel coil from 0.3 mm to 1.0 mm is typical for drywall and ceiling profiles. If you plan a different gauge range, tell us so we can adjust the forming stations and drive.

Can one machine replace manual bending?

Yes. Replacing manual profile bending with a roll forming line removes the most labour-intensive step and gives consistent dimensions. Most customers recover the investment through labour saving within the first year at two-shift operation.

What after-sales support do you offer?

We provide installation guidance by video, a commissioning checklist, a spare parts list and remote assistance during setup. Roller and blade spares are available for re-order.

What is the production speed?

High-speed drywall and ceiling lines in this class run approximately 40-60 m/min for standard stud, track and furring profiles. The actual rate depends on the profile size and cutting cycle.

Related Machines

Explore more machines in this category:

View all Wall, Deck & Panel Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.