Metal Door Frame Roll Forming Machine - OEM Production

Shutter and door-frame profiles are judged by straightness and by the accuracy of the lock and hinge areas. This Metal Door Frame forms the target sections from coil, punches where required, and cuts each piece to a programmed length with a burr-free edge ready for welding or bolting.

Overview

The Metal Door Frame Roll Forming Machine is a fully automatic roll forming line designed to produce metal door frames for OEM production. With 0.8-1.2mm material, feeding width 1220mm, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. It is CE ISO certified with a 1 Year warranty. Every unit ships with a machinery test report and video outgoing-inspection.

Frame and shutter production pairs well with a small bending and welding station: you convert coil all the way to a ready-to-install door frame, which raises your margin well above selling raw profile lengths.

Technical Specifications

Product name	Door Frame Roll Forming Machine in Cangzhou Door Frame Roll Forming
Advantage	Easy installation and operation
After-sales Service	Provided Lifetime technical service
Local service	Provide Engineers door-to-door service
Certification	CE ISO
Raw material	PPGI,PPGL
Material of rollers	GCr12 MOV
Material of shafts	45# steel Tampering treatmen
Cutting type	Hydraulic track cutting
Usage	Building
Type	Tile Forming Machine
Tile Type	Steel
Use	door frame
Warranty	1 Year
Key Selling Points	High Productivity
Rolling thinckness	0.8-1.2mm
Feeding width	1220mm
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Place of Origin	CN;HEB
Brand Name	ZTRFM
Voltage	380v/50hz/3p (As Requested)
*Dimension(LWH)*	91.51.5m
Core Components	Pressure vessel,Motor,Other,Bearing,Gear,Pump,Gearbox,Engine,PLC

Key Specifications of the Metal Door Frame

The line is set up for coil in the 0.8-1.2mm thickness range, with roller clearances and cutting capacity matched to that material program. Feeding width is 1220mm, which determines the widest profile this machine can produce and the coil sizes you can buy economically. Electrical supply is 380v/50hz/3p (As Requested), and the control cabinet can be adapted to your local voltage when ordering. Forming rollers are GCr12 MOV, giving predictable profile accuracy and long intervals between re-grinds. The forming shafts are 45# steel Tampering treatmen, selected for stiffness so the roller stack stays aligned under load. The machine is built to run PPGI coil, and the tooling path is set up for these coated or galvanized materials without surface marking.

Key Features

Processes PPGI,PPGL raw material
Handles 0.8-1.2mm material thickness
Feeding width up to 1220mm
Machinery test report and video outgoing-inspection provided
CE ISO certified

We supply the machine with roller sets for your target sizes and a full parameter list, and keep the drawings on file so re-ordering extra rollers later is a simple email.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI,PPGL coil.

What is the warranty period?

A 1 Year warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.8-1.2mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

What feeding width does this machine accept?

The feeding width is 1220mm. This decides the maximum profile width and also the master coil widths you can purchase, which affects your material cost per meter.

What coil gauge does it handle?

Shutter curtain profiles commonly run from 0.3 mm to 0.6 mm galvanized or pre-painted steel; door frame sections often run 1.0-2.0 mm. Confirm your material and we will size the machine accordingly.

Can I produce door frames and shutters on one line?

Yes, the same machine can be set up for more than one profile family with changeable rollers. If your production mix includes both, we can recommend the configuration that balances changeover time and output.

How do you handle a custom profile?

Send us the profile drawing or a sample section. Our engineers check forming feasibility and confirm the roller layout and station count before production, and we keep the drawings on file for future roller orders.

Does it include punching?

Punching is available as an in-line option, synchronized with the PLC for hole positions on frames and curtain ends. This avoids a separate drilling step and keeps hole spacing consistent.

Related Machines

Explore more machines in this category:

View all Door & Ceiling Profile Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.