Double Line C & U Channel Drywall Machine - 45 m/min

Stud, track, furring and ceiling profiles look simple, but their tolerances decide how fast fitters work on site. This Double Line C & U Channel Drywall is built with precision stations that hold the section profile and leg height steady, so your customers do not waste time forcing panels into mis-shaped tracks.

Overview

The Double Line C & U Channel Drywall Machine is a fully automatic roll forming line designed to produce C and U channel drywall profiles on a double production line. With 4500*2000*1500 drive power, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. PLC control ensures automatic operation. It is CE BV STV ISO certified with a 2 Years warranty. Every unit ships with a machinery test report and video outgoing-inspection.

The same line can run several profile sizes with changeable roller sets, which is a practical way to cover stud, track and furring demand with one machine investment and a small roller inventory.

Technical Specifications

Roller material	Cr12 Mov
Product name	Purlin Roll Forming Machine
Usage	Construction Building Material
Type	Full-automatic
Certification	CE BV STV ISO
Shaft material	45# High Grade Steel
Application	Building Construction
Raw material	PPGI PPGL GI GL
Control system	PLC(imported Brand)
Keywords	Roll Forming Making Machine
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Core Components	PLC,Engine,Bearing,Motor,Gear,Pump
Warranty	2 Years
Key Selling Points	Easy To Operate
Place of Origin	Hebei,China
Brand Name	ZTRFM
Voltage	380V
Power (W)	450020001500
*Dimension (LWH)*	490010001500mm

Key Specifications of the Double Line C & U Channel Drywall

Rated forming speed is 45 m/min, which sets the practical daily output of the line and makes production planning straightforward for the sizes you run. The main drive is rated at 4500*2000*1500, sized for continuous operation at full line speed without overheating on long shifts. Electrical supply is 380V, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC(imported Brand), so operators switch between jobs from the panel without mechanical re-setup. Forming rollers are Cr12 Mov, giving predictable profile accuracy and long intervals between re-grinds. The forming shafts are 45# High Grade Steel, selected for stiffness so the roller stack stays aligned under load.

Key Features

Processes PPGI PPGL GI GL raw material
PLC(imported Brand) for automatic operation
Machinery test report and video outgoing-inspection provided
CE BV STV ISO certified

We test each line with the gauge of coil you specify and provide a sample batch of finished profiles for your quality file before the machine ships.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI PPGL GI GL coil.

What is the warranty period?

A 2 Years warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What is the forming speed of this machine?

The rated forming speed is 45 m/min. Actual output depends on the profile, material gauge and cutting cycle; we confirm the tested speed for your configuration in the quotation.

What is the installed power of this machine?

The line is rated at 4500*2000*1500. Power consumption in practice is lower than the rated figure for most running profiles, since the drive only loads under material.

Which profiles can it produce?

The machine is delivered with rollers for your target profiles, commonly C stud, U track, furring channel, hat channel, wall angle and ceiling T-bar. Additional roller sets can be supplied later for new sizes.

Does it cut profiles to length automatically?

Yes, lengths are set in the PLC and the machine cuts automatically, with counting support for standard packing. Length presets can be stored for the different products you run.

What coil material is suitable?

Galvanized and pre-painted steel coil from 0.3 mm to 1.0 mm is typical for drywall and ceiling profiles. If you plan a different gauge range, tell us so we can adjust the forming stations and drive.

Can one machine replace manual bending?

Yes. Replacing manual profile bending with a roll forming line removes the most labour-intensive step and gives consistent dimensions. Most customers recover the investment through labour saving within the first year at two-shift operation.

Related Machines

Explore more machines in this category:

View all Purlin & Steel Framing Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.