Shipping Container Side Wall Panel Roll Forming Machine

Cladding profiles such as snap-lock, soffit and vertical panels are installed in long visible runs, so even small waves or marks become obvious. This Shipping Container Side Wall Panel is built with closely spaced, hardened stations that hold the profile flat and straight across the full sheet length.

Overview

The Shipping Container Side Wall Panel Roll Forming Machine produces corrugated side wall panels for shipping containers and modular buildings. With a 350H steel main frame, PLC control and 20 m/min forming speed, it is a dependable line for container wall panel production.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, the machine uses high grade 45# forged shafts, chrome plated rollers and Cr12 mould steel cutting blades, processing 0.4-0.8mm PPGI, PPGL, GI and GL coil. CE and ISO certified with a 2-year warranty.

Producing wall profiles alongside roofing profiles lets a workshop cover the whole building envelope from one production floor — an advantage when quoting complete building packages.

Technical Specifications

Product name	Roof Sheet Forming Machine
Usage	Building
Raw material	PPGI PPGL GI GL
Roller material	45#steel Chrome Plated
Cutting blade material	Cr12 Mould Steel
Control system	PLC(imported Brand)
Main frame	350H Steel
Certification	CE ISO
Shaft material	High Grade No.45 Forged
Application	Roof Sheet Production
Type	Tile Forming Machine
Tile Type	Colored Steel
Use	WALL
Voltage	380V
Warranty	2 years
Key Selling Points	High-accuracy
Rolling thinckness	0.4-0.8 mm
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Core Components	Pressure vessel,Motor,Bearing,Gear,Pump,Gearbox,Engine,PLC
Place of Origin	CN;HEB
Brand Name	ZTRFM(Daniel)
Weight	6800 kg
Feeding width	625mm/415mm
size	860X150X150 cm

Key Specifications of the Shipping Container Side Wall Panel

The line is set up for coil in the 0.4-0.8 mm thickness range, with roller clearances and cutting capacity matched to that material program. Feeding width is 625mm/415mm, which determines the widest profile this machine can produce and the coil sizes you can buy economically. Electrical supply is 380V, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC(imported Brand), so operators switch between jobs from the panel without mechanical re-setup. Forming rollers are 45#steel Chrome Plated, giving predictable profile accuracy and long intervals between re-grinds. The forming shafts are High Grade No.45 Forged, selected for stiffness so the roller stack stays aligned under load.

Key Features

Produces container side wall and modular building panels
350H steel main frame, high grade 45# forged shafts
Chrome plated rollers, Cr12 mould steel cutting blades
PLC control (imported brand), 20 m/min forming speed
Processes 0.4-0.8mm PPGI, PPGL, GI and GL coil
CE and ISO certified; 2-year warranty; high-accuracy; video inspection provided

We also confirm the coil width and coating compatibility with your supplier, so the first coil you order is the right one for the machine.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material thickness does it handle?

It processes 0.4-0.8mm PPGI, PPGL, GI and GL coil.

What is the warranty?

A 2-year warranty applies.

Can the machine produce other wall profiles?

Yes, wall panel profiles can be customized according to your drawings.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.4-0.8 mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

What feeding width does this machine accept?

The feeding width is 625mm/415mm. This decides the maximum profile width and also the master coil widths you can purchase, which affects your material cost per meter.

What gauge is typical for wall cladding?

Wall cladding is usually formed from 0.4-0.8 mm coated steel, with heavier gauge for industrial and high-wind areas. Confirm your coil program for the quotation.

What lengths can it cut?

Lengths are programmable in the PLC, typically from 1 m up to 12 m or more. The cut is synchronized with line speed for square ends.

What is the delivery scope?

The machine ships with rollers, cutting tooling, PLC programs and documentation. We test with your profile and send test photos and video before shipment.

What cladding profiles can this machine form?

Typical profiles include snap-lock panels, soffit panels, flat wall panels and trapezoidal wall sheets. The roller set is matched to your profile drawing; additional sets can be supplied later.

Related Machines

Explore more machines in this category:

View all Wall, Deck & Panel Machines | All products

Get a Quote

Interested in this machine? Contact Zhongtuo (ZTRFM) for pricing, delivery time and configuration options. As a CE and ISO certified manufacturer in Botou, Hebei, China since 2019, we serve machinery buyers in over 80 countries with OEM/ODM customization, machinery test reports and video outgoing-inspection on every machine.