Metal Door Frame Bending & Roll Forming Machine - OEM Custom

Door and shutter profiles turn coil into finished sections for overhead doors, rolling shutters, steel door frames and security products. This Metal Door Frame Bending & is arranged to run the target profiles with consistent dimensions and clean cuts, so doors assemble squarely and operate without binding.

Overview

The Metal Door Frame Bending & Roll Forming Machine is a fully automatic roll forming line designed to produce metal door frames with bending and roll forming on one line. With 0.8-1.2mm material, feeding width Other, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. It is CE ISO certified with a 1 Year warranty. Every unit ships with a machinery test report and video outgoing-inspection.

Roller shutter profiles are in demand for shopfronts, warehouses, garages and security doors across warm-climate and high-rainfall markets where metal doors outperform timber. Door frame sections supply joinery workshops and builders who assemble steel door sets on site. This machine lets you produce for both segments from one line.

Technical Specifications

Advantage	Easy installation and operation
Certification	CE ISO
Raw material	PPGI,PPGL
Material of rollers	GCr12 MOV
Material of shafts	45# steel Tampering treatmen
Cutting type	Hydraulic track cutting
Product name	Metal Door Frame Making Machine
Usage	Building
Application	Roof Sheet Production
Main frame	350H Steel
Type	Tile Forming Machine
Tile Type	Steel
Use	door frame
Warranty	1 Year
Key Selling Points	High Productivity
Rolling thinckness	0.8-1.2mm
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Place of Origin	CN;HEB
Brand Name	ZTRFM
Voltage	380v/50hz/3p (As Requested)
*Dimension(LWH)*	91.51.5m
Feeding width	Other
Core Components	Pressure vessel,Motor,Other,Bearing,Gear,Pump,Gearbox,Engine,PLC

Key Specifications of the Metal Door Frame Bending &

The line is set up for coil in the 0.8-1.2mm thickness range, with roller clearances and cutting capacity matched to that material program. Electrical supply is 380v/50hz/3p (As Requested), and the control cabinet can be adapted to your local voltage when ordering. Forming rollers are GCr12 MOV, giving predictable profile accuracy and long intervals between re-grinds. The forming shafts are 45# steel Tampering treatmen, selected for stiffness so the roller stack stays aligned under load. The machine is built to run PPGI coil, and the tooling path is set up for these coated or galvanized materials without surface marking. Cutting is done by Hydraulic track cutting, synchronized with line speed so sheet ends stay square and burr-free.

Key Features

Processes PPGI,PPGL raw material
Handles 0.8-1.2mm material thickness
Feeding width up to Other
Machinery test report and video outgoing-inspection provided
CE ISO certified

Door production punishes inconsistency: a frame leg out of square by two millimetres causes problems at installation. This Metal Door Frame Bending & holds profile tolerances through hardened forming stations and a rigid frame, and the punching unit is indexed to the same PLC as the cut, so hole positions stay aligned piece after piece.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI,PPGL coil.

What is the warranty period?

A 1 Year warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.8-1.2mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

What voltage does the machine require?

The standard configuration runs on 380v/50hz/3p (As Requested). We can adapt the electrical cabinet to your local supply, so confirm your site voltage when ordering.

How do you handle a custom profile?

Send us the profile drawing or a sample section. Our engineers check forming feasibility and confirm the roller layout and station count before production, and we keep the drawings on file for future roller orders.

What profiles can this machine form?

Typical outputs include rolling shutter curtain profiles, door frame sections, side guide rails and related accessories. The roller set is built to your profile drawing, so tell us the section you need and we confirm the configuration.

What is the lead time?

Lead time depends on the configuration; standard lines typically ship in 20-35 days after drawing confirmation. Roller sets are manufactured together with the main machine, so confirming your profile drawing early keeps the schedule short.

Can I produce door frames and shutters on one line?

Yes, the same machine can be set up for more than one profile family with changeable rollers. If your production mix includes both, we can recommend the configuration that balances changeover time and output.

Related Machines

Explore more machines in this category:

View all Door & Ceiling Profile Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.