Electrical Cabinet Frame Roll Forming Machine - PLC

Every roofing contractor and building-material distributor needs a line that turns coil into sale-ready panels at a predictable cost. This Electrical Cabinet Frame is built around that job: it forms the target profile continuously, cuts it to a programmable length, and keeps sheet dimensions consistent so panels pack, stack and install without rework.

Overview

The Electrical Cabinet Frame Roll Forming Machine is a fully automatic roll forming line designed to produce electrical cabinet frame profiles, PLC controlled. With 31.5KW drive power, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. PLC control ensures automatic operation. with a 1 Year warranty. Every unit ships with a machinery test report and video outgoing-inspection.

Roofing lines of this class are used across residential and light-commercial projects: house roofs, farm buildings, warehouses, workshops and shade structures. Buyers in Africa, the Middle East, Southeast Asia and Latin America run these machines to produce corrugated and trapezoidal sheet, ridge capping, flashings and trim sold through local hardware channels.

Technical Specifications

Product name	Electrical Cabinet Frame Machine
Usage	Construction Building Material
Roller material	Cr12
Shaft material	45# High Grade Steel
Control system	PLC(imported Brand)
Raw material	PPGI PPGL GI GL
Cutting blade material	Cr 12 High Grade Steel
Working material	Cold Roll Steel(CRC)
Application	Building Construction
Cutting type	Hydraulic Cutting
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Core Components	PLC,Engine,Bearing,Motor,Gear,Pump
Warranty	1 Year
Key Selling Points	Automatic
Place of Origin	CN
Work Pressure	195 Mpa---350 Mpa
Brand Name	ZTRFM
Voltage	220 V,380V/50HZ 3Phase(as Customer's Request)
Power (W)	31.5KW
*Dimension (LWH)*	About 15m2m2.2m

Key Specifications of the Electrical Cabinet Frame

The main drive is rated at 31.5KW, sized for continuous operation at full line speed without overheating on long shifts. Electrical supply is 220 V, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC(imported Brand), so operators switch between jobs from the panel without mechanical re-setup. Forming rollers are Cr12, giving predictable profile accuracy and long intervals between re-grinds. The forming shafts are 45# High Grade Steel, selected for stiffness so the roller stack stays aligned under load. The machine is built to run PPGI PPGL GI GL coil, and the tooling path is set up for these coated or galvanized materials without surface marking.

Key Features

Processes PPGI PPGL GI GL raw material
PLC(imported Brand) for automatic operation
Machinery test report and video outgoing-inspection provided

Three things decide whether a roofing line earns back its cost: changeover speed, cut accuracy and roller life. This Electrical Cabinet Frame addresses each directly. Profile changes take minutes because the roller stations sit on a common frame; the PLC stores multiple length presets so operators switch between panel lengths in seconds; and the rollers are machined from hardened, ground steel that keeps width consistent across tens of thousands of meters.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI PPGL GI GL coil.

What is the warranty period?

A 1 Year warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What is the installed power of this machine?

The line is rated at 31.5KW. Power consumption in practice is lower than the rated figure for most running profiles, since the drive only loads under material.

What voltage does the machine require?

The standard configuration runs on 220 V. We can adapt the electrical cabinet to your local supply, so confirm your site voltage when ordering.

How long does a profile change take?

Profile changes are measured in minutes, not hours, because the roller stations are mounted on a common frame and aligned to fixed centers. The PLC also stores the programs for your most common profiles, so after the changeover the operator only recalls the saved program.

Can the machine cut different sheet lengths automatically?

Yes. The PLC stores multiple length presets and the cutting system works at line speed. Operators select the programmed length, and the counter stops the line automatically after the set number of sheets.

What coil width and gauge can this line process?

The machine is set up around your coil program during production planning. Tell us your strip width (typically 600-1250 mm) and gauge range (usually 0.25-0.8 mm for light profiles, up to 1.0 mm for heavier sections) and we match the roller stations, motor power and cutting capacity to those values.

What is the production speed?

Rated forming speed depends on the profile and material thickness. Typical roofing lines in this class run between 15 and 40 m/min for light profiles; we state the tested speed for your configuration in the quotation, based on a real test run with your coil.

Related Machines

Explore more machines in this category:

View all Door & Ceiling Profile Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.