Snap Lock Wall & Roof Cladding Machine - Full Automatic

Wall cladding profiles give buildings their outer appearance, so surface quality and colour consistency matter as much as dimensional accuracy. This Snap Lock Wall & Roof Cladding forms the target cladding sections from coated coil with scratch-protected passes and a clean cut, protecting the finish your customers see.

Overview

The Snap Lock Wall & Roof Cladding Machine is a fully automatic roll forming line designed to produce snap lock wall and roof cladding panels, full automatic. With 0.3-0.8mm material, feeding width 1000mm, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. PLC control ensures automatic operation. with a 2 years warranty. Every unit ships with a machinery test report and video outgoing-inspection.

Wall cladding machines supply profiles for commercial facades, industrial buildings, canopy and soffit lining, and interior feature walls. Snap-lock and secret-fix profiles are favoured for fast installation without exposed fasteners, while trapezoidal and corrugated wall profiles suit agricultural and industrial buildings.

Technical Specifications

Product name	Wall Roof Cladding Sheet Snap lock Standing Seam Roll Forming Machine
Raw material width	As the profile drawing
Delivery time	45 working days
Control system	PLC
Automation	Full automatic
Cutting blade material	Cr12 Quenched
Cutting type	Hydraulic Cutting
Speed	0-20m/min
Motor brand	Siemens
Electric brand	Siemens and Schneider
Type	Tile Forming Machine
Tile Type	Colored Steel
Use	ROOF
Warranty	2 years
Key Selling Points	Automatic
Rolling thinckness	0.3-0.8mm
Feeding width	1000mm
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Core Components	Pressure vessel,Motor,Bearing,Gear,Pump,Gearbox,Engine,PLC
Place of Origin	Hebei,China
Brand Name	ZTRFM
Voltage	380V,50HZ,3P
*Dimension(LWH)*	about 8.5m1.4m1.5m

Key Specifications of the Snap Lock Wall & Roof Cladding

Rated forming speed is 0-20m/min, which sets the practical daily output of the line and makes production planning straightforward for the sizes you run. The line is set up for coil in the 0.3-0.8mm thickness range, with roller clearances and cutting capacity matched to that material program. Feeding width is As the profile drawing, which determines the widest profile this machine can produce and the coil sizes you can buy economically. Electrical supply is 380V, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC, so operators switch between jobs from the panel without mechanical re-setup. The machine is built to run Cr12 Quenched coil, and the tooling path is set up for these coated or galvanized materials without surface marking.

Key Features

Processes As the profile drawing raw material
Handles 0.3-0.8mm material thickness
Feeding width up to 1000mm
PLC for automatic operation
Machinery test report and video outgoing-inspection provided

The finish quality of a wall panel line comes from the material path: coated coil can be scratched by worn tooling or sharp guides. This Snap Lock Wall & Roof Cladding uses polyurethane-coated or hardened roller surfaces matched to the coating type, and we verify the profile surface in the test run before shipment.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes As the profile drawing coil.

What is the warranty period?

A 2 years warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What is the forming speed of this machine?

The rated forming speed is 0-20m/min. Actual output depends on the profile, material gauge and cutting cycle; we confirm the tested speed for your configuration in the quotation.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.3-0.8mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

Does the machine protect the coated surface?

Yes. The material path uses roller and guide materials matched to coated coil, and the forming speed is controlled to avoid marking. We verify the surface in the test run.

What is the delivery scope?

The machine ships with rollers, cutting tooling, PLC programs and documentation. We test with your profile and send test photos and video before shipment.

What gauge is typical for wall cladding?

Wall cladding is usually formed from 0.4-0.8 mm coated steel, with heavier gauge for industrial and high-wind areas. Confirm your coil program for the quotation.

Can the line also produce roofing profiles?

Many wall lines share the same coil width as roofing lines, but the profiles differ. If you need both, a double-purpose machine or two tooling sets on one frame can be arranged.

Related Machines

Explore more machines in this category:

View all Wall, Deck & Panel Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.