Roof Ridge Capping Roll Forming Machine - 15 m/min

Every roofing contractor and building-material distributor needs a line that turns coil into sale-ready panels at a predictable cost. This Roof Ridge Capping is built around that job: it forms the target profile continuously, cuts it to a programmable length, and keeps sheet dimensions consistent so panels pack, stack and install without rework.

Overview

The Roof Ridge Capping Roll Forming Machine produces ridge cap and ridge capping profiles for metal roofing systems. With hydraulic cutting, PLC control and 12-15 m/min forming speed, it is an easy-to-operate line for roof panel accessories.

Made by Zhongtuo (ZTRFM) in Botou, Hebei, China, the machine processes 0.3-0.8mm color steel and galvanized sheet with chrome plated 45# steel rollers and Cr12 mould steel cutting blades. CE and ISO certified with a 2-year warranty.

Roofing lines of this class are used across residential and light-commercial projects: house roofs, farm buildings, warehouses, workshops and shade structures. Buyers in Africa, the Middle East, Southeast Asia and Latin America run these machines to produce corrugated and trapezoidal sheet, ridge capping, flashings and trim sold through local hardware channels.

Technical Specifications

Product name	Ridge Capping Forming Machine Automatic Roof Panel Roll Forming Machin
Raw material	Color Steel Sheet,galvanized steel
Application	Construction Panel
Cutting type	hydraulic cutting
Usage	Roof Tile Panel
Thickness	0.3--0.8mm
Control system	PLC
Certification	CE ISO
Roller material	45#steel Chrome Plated
Cutting blade material	Cr12 Mould Steel
Type	Tile Forming Machine
Tile Type	Steel
Use	ROOF
Warranty	2 Years
Key Selling Points	Easy To Operate
Rolling thinckness	0.3-0.8mm
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Place of Origin	CN;HEB
Brand Name	ZTRFM
Voltage	380V/50HZ/3HP
*Dimension(LWH)*	5.5m1.5m1.6m
Weight	3500 kg
Feeding width	Other
Core Components	Motor,Bearing,Gear,Pump,Gearbox,Engine,PLC,Other

Key Specifications of the Roof Ridge Capping

Rated forming speed is 15 m/min, which sets the practical daily output of the line and makes production planning straightforward for the sizes you run. The line is set up for coil in the 0.3--0.8mm thickness range, with roller clearances and cutting capacity matched to that material program. Electrical supply is 380V/50HZ/3HP, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC, so operators switch between jobs from the panel without mechanical re-setup. Forming rollers are 45#steel Chrome Plated, giving predictable profile accuracy and long intervals between re-grinds. The machine is built to run Color Steel Sheet coil, and the tooling path is set up for these coated or galvanized materials without surface marking.

Key Features

Produces ridge cap and capping profiles for metal roofs
Hydraulic cutting with Cr12 mould steel blades
Chrome plated 45# steel rollers, PLC control
Forming speed 12-15 m/min, easy to operate
Processes 0.3-0.8mm color steel and galvanized sheet
CE and ISO certified; 2-year warranty; test report and video inspection provided

Three things decide whether a roofing line earns back its cost: changeover speed, cut accuracy and roller life. This Roof Ridge Capping addresses each directly. Profile changes take minutes because the roller stations sit on a common frame; the PLC stores multiple length presets so operators switch between panel lengths in seconds; and the rollers are machined from hardened, ground steel that keeps width consistent across tens of thousands of meters.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does it process?

It processes 0.3-0.8mm color steel sheet and galvanized steel.

What is the production speed?

Forming speed options are 12 m/min and 15 m/min.

What is the warranty?

A 2-year warranty applies, with test report and video outgoing-inspection provided.

What is the forming speed of this machine?

The rated forming speed is 15 m/min. Actual output depends on the profile, material gauge and cutting cycle; we confirm the tested speed for your configuration in the quotation.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.3--0.8mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

How is the machine tested before shipping?

We run a full production test with your coil width and gauge, cut sample sheets, and record the profiles and lengths. You receive test photos and video before shipment.

What coil width and gauge can this line process?

The machine is set up around your coil program during production planning. Tell us your strip width (typically 600-1250 mm) and gauge range (usually 0.25-0.8 mm for light profiles, up to 1.0 mm for heavier sections) and we match the roller stations, motor power and cutting capacity to those values.

Do you provide the rollers for my profile?

Yes. Every machine ships with the forming rollers, cutting tooling and PLC program matched to your profile drawing. If you add a new profile later, we can supply an additional roller set built to your drawing.

What is the production speed?

Rated forming speed depends on the profile and material thickness. Typical roofing lines in this class run between 15 and 40 m/min for light profiles; we state the tested speed for your configuration in the quotation, based on a real test run with your coil.

Related Machines

Explore more machines in this category:

View all Roof Sheet & Tile Machines | All products

Get a Quote

Interested in this machine? Contact Zhongtuo (ZTRFM) for pricing, delivery time and configuration options. As a CE and ISO certified manufacturer in Botou, Hebei, China since 2019, we serve machinery buyers in over 80 countries with OEM/ODM customization, machinery test reports and video outgoing-inspection on every machine.