Spanish Steel Roof Tile Roll Forming Machine - 20 m/min

Every roofing contractor and building-material distributor needs a line that turns coil into sale-ready panels at a predictable cost. This Spanish Steel Roof Tile is built around that job: it forms the target profile continuously, cuts it to a programmable length, and keeps sheet dimensions consistent so panels pack, stack and install without rework.

Overview

The Spanish Steel Roof Tile Roll Forming Machine produces Spanish-style steel roof tiles and glazed roofing sheets. With hydraulic guide pillar pressing and cutting, PLC control and 20 m/min speed, it delivers full-automatic, easy-to-operate tile production from 1250mm coil.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, the machine processes 0.3-0.8mm PPGI, PPGL, GI and GL coil with electrical motor driving and rolling forming. CE, BV, STV and ISO certified with a 2-year warranty.

Roofing lines of this class are used across residential and light-commercial projects: house roofs, farm buildings, warehouses, workshops and shade structures. Buyers in Africa, the Middle East, Southeast Asia and Latin America run these machines to produce corrugated and trapezoidal sheet, ridge capping, flashings and trim sold through local hardware channels.

Technical Specifications

Usage	Color Steel Construction for roofing
Pressing	Hydraulic Guide Pillar
Cutting	Hydraulic Guide Pillar
Driving	Electrical motor
Forming	Rolling forming
Speed	20 m/min
Control	PLC Control
Advantage	Easy installation;full automatic easy operation
Certification	CE BV STV ISO
Raw material	PPGI PPGL GI GL
Type	Roll Forming Machine
Tile Type	Colored Glaze Steel
Use	ROOF
Warranty	2 years
Key Selling Points	Easy to Operate
Rolling thinckness	0.3-0.8mm
Feeding width	1250mm
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Place of Origin	CN;HEB
Brand Name	ZTRFM
Voltage	customized
*Dimension(LWH)*	10500mm1400mm1500mm
Weight	8500 kg
Core Components	Pressure vessel,Motor,Bearing,Gear,Pump,Gearbox,Engine,PLC,Other

Key Specifications of the Spanish Steel Roof Tile

Rated forming speed is 20 m/min, which sets the practical daily output of the line and makes production planning straightforward for the sizes you run. The line is set up for coil in the 0.3-0.8mm thickness range, with roller clearances and cutting capacity matched to that material program. Feeding width is 1250mm, which determines the widest profile this machine can produce and the coil sizes you can buy economically. The machine is built to run PPGI PPGL GI GL coil, and the tooling path is set up for these coated or galvanized materials without surface marking. Cutting is done by Hydraulic Guide Pillar, synchronized with line speed so sheet ends stay square and burr-free. The complete line occupies roughly 10500mm*1400mm*1500mm on the workshop floor, including the operating clearances at the coil and finished-sheet ends.

Key Features

Produces Spanish-style steel roof tiles and glazed sheets
Hydraulic guide pillar pressing and cutting system
PLC control, full-automatic easy operation
Forming speed 20 m/min, feeding width 1250mm
Processes 0.3-0.8mm PPGI, PPGL, GI and GL coil
CE, BV, STV and ISO certified; 2-year warranty; video inspection provided

Three things decide whether a roofing line earns back its cost: changeover speed, cut accuracy and roller life. This Spanish Steel Roof Tile addresses each directly. Profile changes take minutes because the roller stations sit on a common frame; the PLC stores multiple length presets so operators switch between panel lengths in seconds; and the rollers are machined from hardened, ground steel that keeps width consistent across tens of thousands of meters.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What tile profiles can it produce?

Spanish tile and glazed roofing sheet profiles can be customized according to your drawings.

What material does it process?

It processes 0.3-0.8mm PPGI, PPGL, GI and GL coil with 1250mm feeding width.

What is the warranty?

A 2-year warranty applies.

What is the forming speed of this machine?

The rated forming speed is 20 m/min. Actual output depends on the profile, material gauge and cutting cycle; we confirm the tested speed for your configuration in the quotation.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.3-0.8mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

What coil width and gauge can this line process?

The machine is set up around your coil program during production planning. Tell us your strip width (typically 600-1250 mm) and gauge range (usually 0.25-0.8 mm for light profiles, up to 1.0 mm for heavier sections) and we match the roller stations, motor power and cutting capacity to those values.

How long does a profile change take?

Profile changes are measured in minutes, not hours, because the roller stations are mounted on a common frame and aligned to fixed centers. The PLC also stores the programs for your most common profiles, so after the changeover the operator only recalls the saved program.

How is the machine tested before shipping?

We run a full production test with your coil width and gauge, cut sample sheets, and record the profiles and lengths. You receive test photos and video before shipment.

Do you provide the rollers for my profile?

Yes. Every machine ships with the forming rollers, cutting tooling and PLC program matched to your profile drawing. If you add a new profile later, we can supply an additional roller set built to your drawing.

Related Machines

Explore more machines in this category:

View all Roof Sheet & Tile Machines | All products

Get a Quote

Interested in this machine? Contact Zhongtuo (ZTRFM) for pricing, delivery time and configuration options. As a CE and ISO certified manufacturer in Botou, Hebei, China since 2019, we serve machinery buyers in over 80 countries with OEM/ODM customization, machinery test reports and video outgoing-inspection on every machine.