High Speed Wall Cladding Soffit Machine - 45 m/min

Cladding profiles such as snap-lock, soffit and vertical panels are installed in long visible runs, so even small waves or marks become obvious. This High Speed Wall Cladding Soffit is built with closely spaced, hardened stations that hold the profile flat and straight across the full sheet length.

Overview

The High Speed Wall Cladding Soffit Machine is a fully automatic roll forming line designed to produce wall cladding and soffit roof panels at 45 m/min. With 0.4-0.7mm material, feeding width 415-625, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. with a 2 Years warranty. Every unit ships with a machinery test report and video outgoing-inspection.

Producing wall profiles alongside roofing profiles lets a workshop cover the whole building envelope from one production floor — an advantage when quoting complete building packages.

Technical Specifications

Type	Wall cladding panel forming machine
Tile Type	Galvanized Steel/ color painting steel
Use	Wall
Warranty	2 Years
Key Selling Points	Easy To Operate/Fully automatic using
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Core Components	Pressure Vessel,Motor,Bearing,Gear,Pump,Gearbox,Engine,PLC
Place of Origin	CN;HEB
Brand Name	ZTRFM(Daniel)
Voltage	Can customized
Rolling thinckness	0.4-0.7mm
Feeding width	415-625

Key Specifications of the High Speed Wall Cladding Soffit

Rated forming speed is 45 m/min, which sets the practical daily output of the line and makes production planning straightforward for the sizes you run. The line is set up for coil in the 0.4-0.7mm thickness range, with roller clearances and cutting capacity matched to that material program. Feeding width is 415-625, which determines the widest profile this machine can produce and the coil sizes you can buy economically. Electrical supply is Can customized, and the control cabinet can be adapted to your local voltage when ordering.

Key Features

Handles 0.4-0.7mm material thickness
Feeding width up to 415-625
Machinery test report and video outgoing-inspection provided

We also confirm the coil width and coating compatibility with your supplier, so the first coil you order is the right one for the machine.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI, PPGL, GI and GL coil.

What is the warranty period?

A 2 Years warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What is the forming speed of this machine?

The rated forming speed is 45 m/min. Actual output depends on the profile, material gauge and cutting cycle; we confirm the tested speed for your configuration in the quotation.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.4-0.7mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

Does the machine protect the coated surface?

Yes. The material path uses roller and guide materials matched to coated coil, and the forming speed is controlled to avoid marking. We verify the surface in the test run.

Can the line also produce roofing profiles?

Many wall lines share the same coil width as roofing lines, but the profiles differ. If you need both, a double-purpose machine or two tooling sets on one frame can be arranged.

What gauge is typical for wall cladding?

Wall cladding is usually formed from 0.4-0.8 mm coated steel, with heavier gauge for industrial and high-wind areas. Confirm your coil program for the quotation.

What lengths can it cut?

Lengths are programmable in the PLC, typically from 1 m up to 12 m or more. The cut is synchronized with line speed for square ends.

Related Machines

Explore more machines in this category:

View all Wall, Deck & Panel Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.