Standing Seam Roof Panel Machine - Gear & Bearing

Every roofing contractor and building-material distributor needs a line that turns coil into sale-ready panels at a predictable cost. This Standing Seam Roof Panel is built around that job: it forms the target profile continuously, cuts it to a programmable length, and keeps sheet dimensions consistent so panels pack, stack and install without rework.

Overview

The Standing Seam Roof Panel Machine is a fully automatic roll forming line designed to produce standing seam roof panels for colored steel with gear and bearing drive. With 0.3-0.8mm material, feeding width 1200mm, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. PLC control ensures automatic operation. with a 2 Years warranty. Every unit ships with a machinery test report and video outgoing-inspection.

Roofing lines of this class are used across residential and light-commercial projects: house roofs, farm buildings, warehouses, workshops and shade structures. Buyers in Africa, the Middle East, Southeast Asia and Latin America run these machines to produce corrugated and trapezoidal sheet, ridge capping, flashings and trim sold through local hardware channels.

Technical Specifications

Product name	standing seam clips machine
Keywords	standing seam roof panel
Color	Customised
Cutting type	Hydralic Cutting
Material of rollers	45#steel
Cutting blade material	Cr12 Frequency Quenching
Control system	PLC(detla) System
Suitable material	PPGI PPGL GI GL AL
Advantage	Simple installation, easy to operate
Profiles	snap-loc roofing panel
Type	Tile Forming Machine
Tile Type	Colored Steel
Use	ROOF
Warranty	2 Years
Key Selling Points	Easy To Operate
Rolling thinckness	0.3-0.8mm
Feeding width	1200mm
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Place of Origin	CN;HEB
Brand Name	ZTRFM
Voltage	380V or as you request
*Dimension (LWH)*	5m1.3m1.3m-15m1.3m1.4m
Core Components	Motor,Bearing,Gear,Pump,Gearbox,Engine,PLC,Other

Key Specifications of the Standing Seam Roof Panel

The line is set up for coil in the 0.3-0.8mm thickness range, with roller clearances and cutting capacity matched to that material program. Feeding width is 1200mm, which determines the widest profile this machine can produce and the coil sizes you can buy economically. Electrical supply is 380V or as you request, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC(detla) System, so operators switch between jobs from the panel without mechanical re-setup. Forming rollers are 45#steel, giving predictable profile accuracy and long intervals between re-grinds. The machine is built to run Cr12 Frequency Quenching coil, and the tooling path is set up for these coated or galvanized materials without surface marking.

Key Features

Processes 45#steel raw material
Handles 0.3-0.8mm material thickness
Feeding width up to 1200mm
PLC(detla) System for automatic operation
Machinery test report and video outgoing-inspection provided

Three things decide whether a roofing line earns back its cost: changeover speed, cut accuracy and roller life. This Standing Seam Roof Panel addresses each directly. Profile changes take minutes because the roller stations sit on a common frame; the PLC stores multiple length presets so operators switch between panel lengths in seconds; and the rollers are machined from hardened, ground steel that keeps width consistent across tens of thousands of meters.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes 45#steel coil.

What is the warranty period?

A 2 Years warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.3-0.8mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

What feeding width does this machine accept?

The feeding width is 1200mm. This decides the maximum profile width and also the master coil widths you can purchase, which affects your material cost per meter.

Do you provide the rollers for my profile?

Yes. Every machine ships with the forming rollers, cutting tooling and PLC program matched to your profile drawing. If you add a new profile later, we can supply an additional roller set built to your drawing.

What coil width and gauge can this line process?

The machine is set up around your coil program during production planning. Tell us your strip width (typically 600-1250 mm) and gauge range (usually 0.25-0.8 mm for light profiles, up to 1.0 mm for heavier sections) and we match the roller stations, motor power and cutting capacity to those values.

How long does a profile change take?

Profile changes are measured in minutes, not hours, because the roller stations are mounted on a common frame and aligned to fixed centers. The PLC also stores the programs for your most common profiles, so after the changeover the operator only recalls the saved program.

How is the machine tested before shipping?

We run a full production test with your coil width and gauge, cut sample sheets, and record the profiles and lengths. You receive test photos and video before shipment.

Related Machines

Explore more machines in this category:

View all Roof Sheet & Tile Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.