Double Layer Trapezoidal Roof Tile Machine - 2-in-1 Line

Sheet demand changes fast, and a fixed-profile press locks you into one product. This Double Layer Trapezoidal Roof Tile gives you the flexibility to run different roofing profile orders without retooling delays. Hardened forming rollers, a PLC length control system and a square-cutting shear keep every sheet within the same tolerance, order after order.

Overview

The Double Layer Trapezoidal Roof Tile Machine is a fully automatic roll forming line designed to produce two trapezoidal roof tile profiles on one double layer line. With 0.3-0.8mm material, feeding width 1220mm, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and chrome plated rollers with PLC control. It is CE ISO certified with a 2 years warranty. Every unit ships with a machinery test report and video outgoing-inspection.

The profiles this machine produces are also the base material for roofing accessories such as end caps, flashings and trim sections. Adding this profile to an existing workshop lets you serve one project with several products instead of buying each from a different supplier, which shortens customer lead times and raises average order value.

Technical Specifications

Product name	Roof Sheet Forming Machine
Certification	CE ISO
Control system	PLC control
Application	Construction Panel
Usage	Building
Raw material	PPGI PPGL GI GL
Roller material	45#steel Chrome Plated
Shaft material	High Grade No.45 Forged
Cutting blade material	Cr12 Mould Steel
Main frame	350H Steel
Type	Tile Forming Machine
Tile Type	Colored Steel
Use	ROOF
Warranty	2 years
Key Selling Points	Long Service Life
Rolling thinckness	0.3-0.8mm
Feeding width	1220mm
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Place of Origin	CN;HEB
Brand Name	ZTRFM
Voltage	230V/50HZ
*Dimension(LWH)*	About 8m1.5m1.5m
Core Components	Motor,Bearing,Gear,Pump,Gearbox,Engine,PLC,Other

Key Specifications of the Double Layer Trapezoidal Roof Tile

The line is set up for coil in the 0.3-0.8mm thickness range, with roller clearances and cutting capacity matched to that material program. Feeding width is 1220mm, which determines the widest profile this machine can produce and the coil sizes you can buy economically. Electrical supply is 230V/50HZ, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC control, so operators switch between jobs from the panel without mechanical re-setup. Forming rollers are 45#steel Chrome Plated, giving predictable profile accuracy and long intervals between re-grinds. The forming shafts are High Grade No.45 Forged, selected for stiffness so the roller stack stays aligned under load.

Key Features

Processes PPGI PPGL GI GL raw material
Handles 0.3-0.8mm material thickness
Feeding width up to 1220mm
PLC control for automatic operation
Machinery test report and video outgoing-inspection provided
CE ISO certified

Before delivery we run a full production test with your coil width and gauge, record the sample profiles, and send you photos and video of the test run. Roller spares for the most common sizes are kept in stock, so routine wear does not stop production.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI PPGL GI GL coil.

What is the warranty period?

A 2 years warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.3-0.8mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

What feeding width does this machine accept?

The feeding width is 1220mm. This decides the maximum profile width and also the master coil widths you can purchase, which affects your material cost per meter.

How long does a profile change take?

Profile changes are measured in minutes, not hours, because the roller stations are mounted on a common frame and aligned to fixed centers. The PLC also stores the programs for your most common profiles, so after the changeover the operator only recalls the saved program.

What is the production speed?

Rated forming speed depends on the profile and material thickness. Typical roofing lines in this class run between 15 and 40 m/min for light profiles; we state the tested speed for your configuration in the quotation, based on a real test run with your coil.

How is the machine tested before shipping?

We run a full production test with your coil width and gauge, cut sample sheets, and record the profiles and lengths. You receive test photos and video before shipment.

Can the machine cut different sheet lengths automatically?

Yes. The PLC stores multiple length presets and the cutting system works at line speed. Operators select the programmed length, and the counter stops the line automatically after the set number of sheets.

Related Machines

Explore more machines in this category:

View all Roof Sheet & Tile Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.