Double Layer Glaze Trapezoidal Tile Machine - 2-in-1

Every roofing contractor and building-material distributor needs a line that turns coil into sale-ready panels at a predictable cost. This Double Layer Glaze Trapezoidal Tile is built around that job: it forms the target profile continuously, cuts it to a programmable length, and keeps sheet dimensions consistent so panels pack, stack and install without rework.

Overview

The Double Layer Glaze Trapezoidal Tile Machine is a fully automatic roll forming line designed to produce two glaze trapezoidal tile profiles on one double layer line. With 0.8 mm ~ 1.2 mm material, feeding width 1000 mm, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. It is CE ISO certified with a 1 Year warranty. Every unit ships with a machinery test report and video outgoing-inspection.

Roofing lines of this class are used across residential and light-commercial projects: house roofs, farm buildings, warehouses, workshops and shade structures. Buyers in Africa, the Middle East, Southeast Asia and Latin America run these machines to produce corrugated and trapezoidal sheet, ridge capping, flashings and trim sold through local hardware channels.

Technical Specifications

Advantage	Easy installation and operation
Certification	CE ISO
Material of shafts	45# steel with tempered
Product name	Roof Sheet Forming Machine
Usage	Building
Raw material	PPGI PPGL GI GL
Roller material	45#steel Chrome Plated
Cutting blade material	Cr12 Mould Steel
Shaft material	High Grade No.45 Forged
Keywords	Colored Steel Roof Making Machine
Type	Tile Forming Machine
Tile Type	Colored Glaze Steel
Use	ROOF
Warranty	1 Year
Key Selling Points	Long Service Life
Rolling thinckness	0.8 mm ~ 1.2 mm
Feeding width	1000 mm
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Place of Origin	CN;HEB
Brand Name	ZTRFM
Voltage	230V/50HZ
*Dimension (LWH)*	9.5m1.65m1.5m
Core Components	Motor,Bearing,Gear,Pump,Gearbox,Engine,PLC,Other

Key Specifications of the Double Layer Glaze Trapezoidal Tile

The line is set up for coil in the 0.8 mm ~ 1.2 mm thickness range, with roller clearances and cutting capacity matched to that material program. Feeding width is 1000 mm, which determines the widest profile this machine can produce and the coil sizes you can buy economically. Electrical supply is 230V/50HZ, and the control cabinet can be adapted to your local voltage when ordering. Forming rollers are 45#steel Chrome Plated, giving predictable profile accuracy and long intervals between re-grinds. The forming shafts are 45# steel with tempered, selected for stiffness so the roller stack stays aligned under load. The machine is built to run PPGI PPGL GI GL coil, and the tooling path is set up for these coated or galvanized materials without surface marking.

Key Features

Processes PPGI PPGL GI GL raw material
Handles 0.8 mm ~ 1.2 mm material thickness
Feeding width up to 1000 mm
Machinery test report and video outgoing-inspection provided
CE ISO certified

Three things decide whether a roofing line earns back its cost: changeover speed, cut accuracy and roller life. This Double Layer Glaze Trapezoidal Tile addresses each directly. Profile changes take minutes because the roller stations sit on a common frame; the PLC stores multiple length presets so operators switch between panel lengths in seconds; and the rollers are machined from hardened, ground steel that keeps width consistent across tens of thousands of meters.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI PPGL GI GL coil.

What is the warranty period?

A 1 Year warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.8 mm ~ 1.2 mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

What feeding width does this machine accept?

The feeding width is 1000 mm. This decides the maximum profile width and also the master coil widths you can purchase, which affects your material cost per meter.

How is the machine tested before shipping?

We run a full production test with your coil width and gauge, cut sample sheets, and record the profiles and lengths. You receive test photos and video before shipment.

What coil width and gauge can this line process?

The machine is set up around your coil program during production planning. Tell us your strip width (typically 600-1250 mm) and gauge range (usually 0.25-0.8 mm for light profiles, up to 1.0 mm for heavier sections) and we match the roller stations, motor power and cutting capacity to those values.

Do you provide the rollers for my profile?

Yes. Every machine ships with the forming rollers, cutting tooling and PLC program matched to your profile drawing. If you add a new profile later, we can supply an additional roller set built to your drawing.

What is the production speed?

Rated forming speed depends on the profile and material thickness. Typical roofing lines in this class run between 15 and 40 m/min for light profiles; we state the tested speed for your configuration in the quotation, based on a real test run with your coil.

Related Machines

Explore more machines in this category:

View all Roof Sheet & Tile Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.