Elevator Guide Rail Roll Forming Machine (Cold Drawn Profiles)
What Is an Elevator Guide Rail Roll Forming Machine?
An elevator guide rail roll forming machine produces the steel guide rails that elevator cars and counterweights travel along inside the hoistway. While the heaviest elevator rails are hot-rolled, lighter guide rails for low- and mid-rise elevators, and the profiles used by lift manufacturers, can be cold roll formed from steel strip. Roll-formed elevator rails are lighter and cheaper than hot-rolled equivalents for lower load classes, which is why lift manufacturers and profile producers use cold forming lines for these sections.
Typical Guide Rail Profiles
- T-shaped guide rails: cold-rolled T profiles in the lighter weight classes used for smaller elevators and service lifts.
- Omega / special sections: custom guide profiles per the lift manufacturer's design.
- Mounting accessories: brackets and fishplates formed or punched from the same coil family.
Machine Configuration
| Material | Cold rolled steel strip |
| Thickness | 2.0-4.0 mm (per rail class) |
| Forming speed | 4-10 m/min (heavy sections) |
| Forming stations | 14-24 sets |
| Cutting | Auto length cut, typically 5 m rails |
Applications
Produced by lift component manufacturers and steel profile companies supplying elevator and escalator industries in China, India, the Middle East, Southeast Asia and Latin America.
FAQ
Can elevator guide rails be roll formed?
Yes — lighter guide rail classes and special sections are cold roll formed from steel strip; heavy classes remain hot-rolled.
What profiles does the machine make?
T-shaped rails in lighter classes plus custom guide sections per your drawing.
What thickness is used?
Typically 2.0-4.0 mm cold-rolled steel, depending on the rail class.
How long are the rails?
Common rail lengths are about 5 m, cut automatically; longer rails possible per project.
Is the machine tooled to my rail drawing?
Yes — send your rail cross-section drawing for tooling and quotation.
What is the minimum order quantity?
MOQ is 1 set.
Related Machines
Coil Slitting Line | Storage Rack Machine | All Products | Get a Quote
Get a Quote
Contact ZTRFM with your guide rail drawing for a quotation.