Drip Edge Angle & Stud Track Machine - 45 m/min

Drywall and ceiling profiles are high-volume, low-margin products, so the machine that makes them must run fast and stop rarely. This Drip Edge Angle & Stud Track forms the target sections from galvanized coil at high line speed, with a PLC that keeps lengths consistent for palletizing and direct dispatch.

Overview

The Drip Edge Angle & Stud Track Machine is a fully automatic roll forming line designed to produce drip edge angle and metal stud track profiles at 45 m/min. With 0.4-0.8 mm material, feeding width 152.4 mm, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. PLC control ensures automatic operation. It is CE BV STV ISO certified with a 2 years warranty. Every unit ships with a machinery test report and video outgoing-inspection.

These machines supply profiles to drywall contractors, ceiling installers and partition-system manufacturers. Target profiles are consumed in office fit-outs, hotels, hospitals and residential projects wherever lightweight steel framing is preferred over timber. Demand is steady, so a drywall line usually reaches high utilization within the first months of operation.

Technical Specifications

Product name	Roof Sheet Forming Machine
Usage	Building
Raw material	PPGI PPGL GI GL
Roller material	45#steel Chrome Plated
Cutting blade material	Cr12 Mould Steel
Shaft material	High Grade No.45 Forged
Control system	PLC(imported Brand)
Main frame	350H Steel
Certification	CE BV STV ISO
Application	Roof Sheet Production
Type	Tile Forming Machine
Tile Type	Colored Steel
Warranty	2 years
Key Selling Points	High Productivity
Rolling thinckness	0.4-0.8 mm
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Place of Origin	CN;HEB
Use	Drip edge
Brand Name	ZTRFM
Voltage	380v/50hz/3p (As Requested)
*Dimension(LWH)*	8.91.151.35m
Feeding width	152.4 mm
Core Components	Pressure vessel,Motor,Bearing,Gear,Pump,Gearbox,Engine,PLC,Other

Key Specifications of the Drip Edge Angle & Stud Track

Rated forming speed is 45 m/min, which sets the practical daily output of the line and makes production planning straightforward for the sizes you run. The line is set up for coil in the 0.4-0.8 mm thickness range, with roller clearances and cutting capacity matched to that material program. Feeding width is 152.4 mm, which determines the widest profile this machine can produce and the coil sizes you can buy economically. Electrical supply is 380v/50hz/3p (As Requested), and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC(imported Brand), so operators switch between jobs from the panel without mechanical re-setup. Forming rollers are 45#steel Chrome Plated, giving predictable profile accuracy and long intervals between re-grinds.

Key Features

Processes PPGI PPGL GI GL raw material
Handles 0.4-0.8 mm material thickness
Feeding width up to 152.4 mm
PLC(imported Brand) for automatic operation
Machinery test report and video outgoing-inspection provided
CE BV STV ISO certified

For drywall lines, uptime is everything. This Drip Edge Angle & Stud Track uses a drive sized for continuous duty, a quick-release roller arrangement for profile changes, and a cutting unit that keeps pace with the fastest packing crew. Most operators reach full rated speed within the first week.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI PPGL GI GL coil.

What is the warranty period?

A 2 years warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What is the forming speed of this machine?

The rated forming speed is 45 m/min. Actual output depends on the profile, material gauge and cutting cycle; we confirm the tested speed for your configuration in the quotation.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.4-0.8 mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

Which profiles can it produce?

The machine is delivered with rollers for your target profiles, commonly C stud, U track, furring channel, hat channel, wall angle and ceiling T-bar. Additional roller sets can be supplied later for new sizes.

What after-sales support do you offer?

We provide installation guidance by video, a commissioning checklist, a spare parts list and remote assistance during setup. Roller and blade spares are available for re-order.

What coil material is suitable?

Galvanized and pre-painted steel coil from 0.3 mm to 1.0 mm is typical for drywall and ceiling profiles. If you plan a different gauge range, tell us so we can adjust the forming stations and drive.

Does it cut profiles to length automatically?

Yes, lengths are set in the PLC and the machine cuts automatically, with counting support for standard packing. Length presets can be stored for the different products you run.

Related Machines

Explore more machines in this category:

View all Purlin & Steel Framing Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.