Door Frame & Shutter Side Guide Machine - OEM

Shutter and door-frame profiles are judged by straightness and by the accuracy of the lock and hinge areas. This Door Frame & Shutter Side Guide forms the target sections from coil, punches where required, and cuts each piece to a programmed length with a burr-free edge ready for welding or bolting.

Overview

The Door Frame & Shutter Side Guide Machine is a fully automatic roll forming line designed to produce steel door frames and shutter side guides. With 11 stations forming stations, 0.3-0.8mm material, feeding width 1000mm, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. It is CE ISO certified with a 2 years warranty. Every unit ships with a machinery test report and video outgoing-inspection.

Frame and shutter production pairs well with a small bending and welding station: you convert coil all the way to a ready-to-install door frame, which raises your margin well above selling raw profile lengths.

Technical Specifications

Advantage	Easy installation and operation
Certification	CE ISO
Raw material	PPGI,PPGL
Material of rollers	GCr12 MOV
Forming stations	11 stations
Diameter of shafts	60 mm
Material of shafts	45# steel Tampering treatmen
Cutting type	Hydraulic track cutting
Product name	Roof Sheet Forming Machine
Usage	Building
Type	Tile Forming Machine
Tile Type	Steel
Use	shutter door
Warranty	2 years
Key Selling Points	High Productivity
Rolling thinckness	0.3-0.8mm
Feeding width	1000mm
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Place of Origin	CN;HEB
Brand Name	ZTRFM
Voltage	220/380/440V-50HZ-3P (As requested),440V
*Dimension(LWH)*	48008001400 mm
Core Components	Pressure vessel,Motor,Bearing,Gear,Pump,Gearbox,Engine,PLC,Other
product title	For OEM ODM High Productivity Steel Door Frame Shutter Door Side Guide Roll Forming Machine Gear Bearing CE ISO Certified 11

Key Specifications of the Door Frame & Shutter Side Guide

The profile is formed progressively through 11 stations, which spreads the bending load over many passes and keeps section dimensions steady across long runs. The line is set up for coil in the 0.3-0.8mm thickness range, with roller clearances and cutting capacity matched to that material program. Feeding width is 1000mm, which determines the widest profile this machine can produce and the coil sizes you can buy economically. Electrical supply is 220/380/440V-50HZ-3P (As requested), and the control cabinet can be adapted to your local voltage when ordering. Forming rollers are GCr12 MOV, giving predictable profile accuracy and long intervals between re-grinds. The forming shafts are 60 mm, selected for stiffness so the roller stack stays aligned under load.

Key Features

11 stations forming stations for stable, precise profile shaping
Processes PPGI,PPGL raw material
Handles 0.3-0.8mm material thickness
Feeding width up to 1000mm
Machinery test report and video outgoing-inspection provided
CE ISO certified

We supply the machine with roller sets for your target sizes and a full parameter list, and keep the drawings on file so re-ordering extra rollers later is a simple email.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI,PPGL coil.

What is the warranty period?

A 2 years warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

How many forming stations does this machine have?

This model is equipped with 11 stations. The station count is matched to the profile complexity, so each pass adds only a small bend and the section holds its shape without spring-back issues.

What material thickness can this machine process?

The machine is configured for coil thickness in the 0.3-0.8mm range. If you plan to run material outside this range, tell us in advance so we can adjust the roller stations and cutting unit.

What coil gauge does it handle?

Shutter curtain profiles commonly run from 0.3 mm to 0.6 mm galvanized or pre-painted steel; door frame sections often run 1.0-2.0 mm. Confirm your material and we will size the machine accordingly.

Can I produce door frames and shutters on one line?

Yes, the same machine can be set up for more than one profile family with changeable rollers. If your production mix includes both, we can recommend the configuration that balances changeover time and output.

How do you handle a custom profile?

Send us the profile drawing or a sample section. Our engineers check forming feasibility and confirm the roller layout and station count before production, and we keep the drawings on file for future roller orders.

Does it include punching?

Punching is available as an in-line option, synchronized with the PLC for hole positions on frames and curtain ends. This avoids a separate drilling step and keeps hole spacing consistent.

Related Machines

Explore more machines in this category:

View all Purlin & Steel Framing Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.