CD UD UW CW Profile Machine - C Channel Line

Sheet demand changes fast, and a fixed-profile press locks you into one product. This CD UD UW CW Profile gives you the flexibility to run different roofing profile orders without retooling delays. Hardened forming rollers, a PLC length control system and a square-cutting shear keep every sheet within the same tolerance, order after order.

Overview

The CD UD UW CW Profile Machine is a fully automatic roll forming line designed to produce CD, UD, UW and CW steel profiles. With 7.5kw,7 KW drive power, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. PLC control ensures automatic operation. with a 1 Year warranty. Every unit ships with a machinery test report and video outgoing-inspection.

The profiles this machine produces are also the base material for roofing accessories such as end caps, flashings and trim sections. Adding this profile to an existing workshop lets you serve one project with several products instead of buying each from a different supplier, which shortens customer lead times and raises average order value.

Technical Specifications

Product name	Metal Profile CD UD UW CW Roll Forming Machine
Number	12 rollers
Diameter of axis	50mm
Frame	UD CD UW CW Profiles
Drive mode	gear
Main axle material	45# steel
speed	0-40m/min
Control system	Siemens Control System
power	7.5kw,7 KW
Material of axis	45#steel
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Core Components	PLC,Engine,Bearing,Gearbox,Motor,Pressure vessel,Gear,Pump
Warranty	1 Year
Key Selling Points	Easy to Operate
Place of Origin	CN;HEB
Brand Name	ZTRFM
Voltage	380V 50HZ 3Phase
*Dimension(LWH)*	6800mm800mm1200mm
product title	ZTRFM Metal Profile CD UD UW CW Roll Forming Machine c Channel Roll Forming Machine Frame Steel Machine

Key Specifications of the CD UD UW CW Profile

Rated forming speed is 0-40m/min, which sets the practical daily output of the line and makes production planning straightforward for the sizes you run. The main drive is rated at 7.5kw, sized for continuous operation at full line speed without overheating on long shifts. Electrical supply is 380V 50HZ 3Phase, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the Siemens Control System, so operators switch between jobs from the panel without mechanical re-setup. The machine is built to run 45# steel coil, and the tooling path is set up for these coated or galvanized materials without surface marking. The complete line occupies roughly 6800mm*800mm*1200mm on the workshop floor, including the operating clearances at the coil and finished-sheet ends.

Key Features

Processes 45# steel raw material
Siemens Control System for automatic operation
Machinery test report and video outgoing-inspection provided

Before delivery we run a full production test with your coil width and gauge, record the sample profiles, and send you photos and video of the test run. Roller spares for the most common sizes are kept in stock, so routine wear does not stop production.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes 45# steel coil.

What is the warranty period?

A 1 Year warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What is the forming speed of this machine?

The rated forming speed is 0-40m/min. Actual output depends on the profile, material gauge and cutting cycle; we confirm the tested speed for your configuration in the quotation.

What is the installed power of this machine?

The line is rated at 7.5kw. Power consumption in practice is lower than the rated figure for most running profiles, since the drive only loads under material.

How long does a profile change take?

Profile changes are measured in minutes, not hours, because the roller stations are mounted on a common frame and aligned to fixed centers. The PLC also stores the programs for your most common profiles, so after the changeover the operator only recalls the saved program.

What is the production speed?

Rated forming speed depends on the profile and material thickness. Typical roofing lines in this class run between 15 and 40 m/min for light profiles; we state the tested speed for your configuration in the quotation, based on a real test run with your coil.

Can the machine cut different sheet lengths automatically?

Yes. The PLC stores multiple length presets and the cutting system works at line speed. Operators select the programmed length, and the counter stops the line automatically after the set number of sheets.

Do you provide the rollers for my profile?

Yes. Every machine ships with the forming rollers, cutting tooling and PLC program matched to your profile drawing. If you add a new profile later, we can supply an additional roller set built to your drawing.

Related Machines

Explore more machines in this category:

View all Sandwich Panel Production Line | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.