Automatic Metal Stud Framing Machine - Gear & Motor

Stud, track, furring and ceiling profiles look simple, but their tolerances decide how fast fitters work on site. This Automatic Metal Stud Framing is built with precision stations that hold the section profile and leg height steady, so your customers do not waste time forcing panels into mis-shaped tracks.

Overview

The Automatic Metal Stud Framing Machine is a fully automatic roll forming line designed to produce metal stud framing with gear and motor drive. With 22.5kw drive power, it delivers consistent, high quality production for building and construction applications.

Manufactured by Zhongtuo (ZTRFM) in Botou, Hebei, China, this machine uses high grade 45# steel shafts and rollers. PLC control ensures automatic operation. with a 2 years warranty. Every unit ships with a machinery test report and video outgoing-inspection.

The same line can run several profile sizes with changeable roller sets, which is a practical way to cover stud, track and furring demand with one machine investment and a small roller inventory.

Technical Specifications

Product name	Purlin Roll Forming Machine
Usage	Construction Building Material
Roller material	45#steel Chrome Plated
Shaft material	45# High Grade Steel
Control system	PLC(imported Brand)
Raw material	PPGI PPGL GI GL
Cutting blade material	Cr 12 High Grade Steel
Working material	Cold Roll Steel(CRC)
Application	Building Construction
Cutting type	Hydraulic Cutting
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Core Components	PLC,Engine,Bearing,Gearbox,Motor,Pressure vessel,Gear,Pump
Warranty	2 years
Key Selling Points	Automatic
Place of Origin	CN;HEB
Work Pressure	16Mpa
Brand Name	ZTRFM
Voltage	380V,50Hz,3P(Or as request)
Power	22.5kw
*Dimension(LWH)*	About 7m1.2m1.5m
product title	ZTRFM Automatic Metal Stud Framing Machine with Gear & Motor C Channel Forming & Punching Holes Grouting Keel Machine

Key Specifications of the Automatic Metal Stud Framing

The main drive is rated at 22.5kw, sized for continuous operation at full line speed without overheating on long shifts. Electrical supply is 380V, and the control cabinet can be adapted to your local voltage when ordering. Length presets, counting and profile programs run on the PLC(imported Brand), so operators switch between jobs from the panel without mechanical re-setup. Forming rollers are 45#steel Chrome Plated, giving predictable profile accuracy and long intervals between re-grinds. The forming shafts are 45# High Grade Steel, selected for stiffness so the roller stack stays aligned under load. The machine is built to run PPGI PPGL GI GL coil, and the tooling path is set up for these coated or galvanized materials without surface marking.

Key Features

Processes PPGI PPGL GI GL raw material
PLC(imported Brand) for automatic operation
Machinery test report and video outgoing-inspection provided

We test each line with the gauge of coil you specify and provide a sample batch of finished profiles for your quality file before the machine ships.

FAQ

What is the minimum order quantity?

The MOQ is 1 set.

What material does this machine process?

It processes PPGI PPGL GI GL coil.

What is the warranty period?

A 2 years warranty applies, with machinery test report and video outgoing-inspection provided.

Can the machine be customized for my profile?

Yes. Roller sets and profiles can be customized to your drawings, and OEM/ODM service is available.

What is the installed power of this machine?

The line is rated at 22.5kw. Power consumption in practice is lower than the rated figure for most running profiles, since the drive only loads under material.

What voltage does the machine require?

The standard configuration runs on 380V. We can adapt the electrical cabinet to your local supply, so confirm your site voltage when ordering.

What coil material is suitable?

Galvanized and pre-painted steel coil from 0.3 mm to 1.0 mm is typical for drywall and ceiling profiles. If you plan a different gauge range, tell us so we can adjust the forming stations and drive.

Can one machine replace manual bending?

Yes. Replacing manual profile bending with a roll forming line removes the most labour-intensive step and gives consistent dimensions. Most customers recover the investment through labour saving within the first year at two-shift operation.

What after-sales support do you offer?

We provide installation guidance by video, a commissioning checklist, a spare parts list and remote assistance during setup. Roller and blade spares are available for re-order.

What is the production speed?

High-speed drywall and ceiling lines in this class run approximately 40-60 m/min for standard stud, track and furring profiles. The actual rate depends on the profile size and cutting cycle.

Related Machines

Explore more machines in this category:

View all Purlin & Steel Framing Machines | All products

Get a Quote

Contact Zhongtuo (ZTRFM) for pricing and configuration. Since 2019 we manufacture CE and ISO certified roll forming lines in Botou, Hebei, China, serving buyers in over 80 countries.